The Plug-In Wiring Adapter # TK93VR will allow you to connect your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 to your 2023 Jeep Grand Wagoneer. We do have the Replacement Mounts # 7686 & # P7685 should you decide to leave the mounting bracket in your Escalade or they become lost or damaged.
The electrical connection for the controller can be hard to find under the dash. I have included a installation video we did for the P3 # 90195 near the bottom of the page you can watch to... view full answer...
I have an option for you, but there is not a custom fit trailer hitch receiver confirmed to fit your 1988 Jeep Grand Wagoneer.
The only option is to install a universal trailer hitch receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 that has 16" brackets that a local fabrication shop can custom fit to your vehicle.
I included a video of the # 41990-16 for you to take a look at. view full answer...
I'd go with the Wheel Master Vision Plus Extendable Towing Mirror part # WM6500. These install easily, give you about as wide of a viewing angle as you could possibly want and are very stable. Since they don't grab onto the vehicle mirrors the mirrors of your 2022 Jeep Grand Wagoneer would not be an issue. view full answer...
I am sorry to report that we offer no custom-fit hitches for your 1989 Jeep Grand Wagoneer, neither rear-mount nor front-mount.
We do offer frame-mount hitches for RVs that offer adjustability to fit various sizes of trailer and motorhome frames; these are all shown on the linked page. To determine if one of these will fit you will need to get under the GW to see if there is frame access and what the frame width is. You would definitely need to drill into the frame unless you chose to... view full answer...
Of the three wires, one would be the ground, one for the turn signal/brake light, and the third for the running lights. I am not familiar with the wire colors you describe. Your best bet would be to connect to the existing wires in differing combinations until the lamp works correctly.
The first step in diagnosing the wiring problem would be check the wires leading to each fixture to ensure that the signal is getting through. Typically, there will be a yellow and a brown wire on the driver's... view full answer...
I have a replacement weight distribution system option, but I reached out to my contact at Reese and the new trunnions and spring bars will unfortunately not fit in your older system due to the new components being a different size.
Instead I recommend replacing the system with the Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW # RP66559 which works with total tongue weights between 500-1000lbs and would be a great replacement for your older system.... view full answer...
For your 2023 Jeep Grand Wagoneer, you'll need a diode wiring harness, and you can choose from either a coiled cord or straight cord:
- Straight Cord: Roadmaster Diode Wiring Kit # RM-152-98146-7
- Coiled Cord: Roadmaster Diode Wiring Kit # RM-15267 view full answer...
The Curt T-Connector trailer wiring harness part # C55369 that you referenced does plug into existing wiring with the green connector opposite of the 4-way connector. I attached an install video for this kit for you to check out as well. view full answer...
Base plates # 1403-1 for your 1989 Jeep Grand Wagoneer are fixed base plates meaning they do not have any removable parts and will always be present at the front of the vehicle. If you need to flat tow this vehicle these base plates are the only option.
For a compatible tow bar I recommend the Falcon 2 # RM-520 rated for 6,000 pounds. I have included a link to a video review of this tow bar for you. You will also need safety cables, # RM-643. The coiled design helps keep the cables off... view full answer...
I recommend using the Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 for your 2022 Jeep Grand Wagoneer. This splices into your OEM wiring but has diodes that protect your OEM wiring from damage.
Attached is an installation video of this kit on a 2021 Wrangler Unlimited for you to check out.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do... view full answer...
Redarc doesn't make a plug-in wire harness for your 2022 Jeep Wagoneer, but they do make an adapter # 331-TPH-017 to connect to a Tekonsha plug-in wire harness like part # TK93VR so that you won't have to splice-in any wires to install your brake controller. view full answer...
I have attached for you below a list of parts you will need to flat-tow a 1988 Jeep Grand Wagoneer with all four wheels down behind a motorhome.
Roadmaster Crossbar-Style Base Plate Kit part # 1403-1
Roadmaster Falcon 2 Tow Bar part # RM-520
Roadmaster 64" Single Hook, Straight Safety Cables part # RM-645
Tow Ready Tail Light Isolating Diode System with 4-Pole Connector part # TR118821
Blue Ox Patriot Portable Braking System part # BLU37TR view full answer...
I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers.
Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel.
To determine if these will fit directly to the brackets that you currently... view full answer...
A 5-way is not normally an OEM option on vehicles, so there is a very good chance it is not an OEM part. With the pins spread out more, that makes it even less likely to be an OEM 5-way as the plugs have not changed shape or width since 1986.
I recommend using a circuit tester like # PTW2993 to check the wiring functions. I've attached a video to assist. The 5th function will either be reverse light function that will only come on when the vehicle is shifted into reverse, or a brake... view full answer...
The Roadmaster Base Plate Kit part # 1403-1 have been confirmed to fit your 1986 Jeep Grand Wagoneer. I confirmed this with Roadmaster. The picture that is used on the product page is a typical photo used to give the idea of what the product will look like once installed. I can guarantee this will fit your vehicle.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible... view full answer...
The Roadmaster Direct-Connect Base Plate Kit # RM24MR for your 2023 Jeep Grand Wagoneer works with any of the "direct-connect" style Roadmaster crossbars. My favorite is the Roadmaster Nighthawk All Terrain # RM-676 because it has LED lights along the arms so it's really easy for people on the road to tell that your Wagoneer is being flat-towed and it isn't just someone tailgating your motorhome really bad at night. view full answer...
I checked with Roadmaster and confirmed that base plates # 1403-1 are for the 1987 Jeep Grand Wagoneer. There is a completely different part number for the regular Wagoneer. In addition to the base plates you will also need a compatible tow bar, safety cables, lighting, and a braking system.
But first, check your owners manual for the proper towing procedure and/or any additional parts that may be needed if the vehicle can be flat towed.
The most popular compatible tow bar is the Falcon... view full answer...
Since we don't have a compatible baseplate fit for your 1986 Jeep Grand Wagoneer the only option for a tow bar would be a Car-Mount like the Curt Tow Bar with Adjustable-Width Arms # C19745. This tow bar only has a 5,000lb capacity and the curb weight of a 1986 Jeep Grand Wagoneer is around 4,500lbs so you won't be able to really load the trunk up with anything and you'll also need to verify the bumper is rated to be towed from. view full answer...
While there isn't a custom fit option, there may be a universal towing mirror for your 2022 Jeep Grand Wagoneer. I say "may" because you have to measure your mirror to see how large it is for a fit. If your mirror measures 4-1/2" to 11-1/2" tall you can use the following:
- K-Source Universal Towing Mirrors # KS3891-2 view full answer...
Go To Results